Whether you want a stock barndominium design or custom and unique design incorporating all your needs, we are here to help. We specialize in barndominium design and drafting. Your design and home are in the best hands with American Construction Consulting. Communication is the key to our success. We mostly care about our customers satisfaction and we always aim to get them the house they are looking for. Check out our stock plans and our prices below. More stock plans to come. Contact us for custom plans. 

Builder Set

This Set will allow you to get Quotes from Builders and Contractors with exact estimation

Floor Plan

Floor Plan includes the following:

1- Internal and external Walls Location

2- External Doors and Windows Location  

3- Rooms Dimensions 

Elevations

Elevations Includes the following:

1- Eave Height 

2- Openings location with Sill and Top Height 

3- Porches Eave Height 

Total

$250

1. Customer & Builder’s Responsibilities.

   You acknowledge and agree that: (i) the following items are your builder’s and your responsibilities; (ii) you will use your best efforts to cause your builder to fulfill such responsibilities; and (iii) American Construction Consulting and its Designers shall have no responsibility or liability with respect to such items:

1. Your builder is responsible for assuring that all work is in accordance with the latest edition of all applicable national, state, and local building codes, construction industry standards and other Applicable Laws.
2. Your builder is responsible for obtaining the required permits and inspections from local governmental agencies.
3. Your builder is responsible for checking the Plans prior to construction to verify all dimensions and details for overall accuracy appropriate to the local conditions.
4. Your builder is responsible for working with you on decisions for the final selection of materials such as masonry, floor joists, lumber, structural members, construction panels, roofing, etc., all of which can create variations in dimension and details. For example, if standard lumber joists are used in place of engineered floor joists, the floor-to-floor dimension would vary from the Plans and require revised stair dimension and framing.
5. Your builder is responsible for providing standard construction details and practices which will result in a structurally sound and weatherproof finished product.
6. Your builder is responsible for all construction means, methods, sequencing, techniques, and safety on the job site of construction workers and third parties.
7. Your builder is responsible for assuring that all materials, equipment and components are new and of good quality.
8. Your builder is responsible for assuring that all manufactured articles, material, and equipment are applied, installed, connected, erected, used, cleaned, adjusted, operated and conditioned as directed by the manufacturers. Your builder must follow all instruction to sustain and preserve all expressed or implied warranties and guarantees. It is the responsibility of the builder to assure that all materials, equipment and components are new and of good quality.
2. The Plans are intended to indicate design intent and basic construction detailing. It is your responsibility to ensure that you have obtained the proper professional assistance to provide standard construction details and practices, which will result in a structurally sound and weatherproof finished product. Any use of the Plans, and/or modifications of the Plans, by you, builders or others on your behalf, is done at your own risk.
3. The Plans do not include any plumbing, heating or air conditioning drawings due to the wide variety of local codes and climatic conditions. We recommend that you have a local electrical engineer, mechanical engineer or builder provide such of these drawings as may be required for permits and construction.
4. Any foundation plan and associated details included in the Plans are intended to serve as a basic guide for a typical foundation system. This typical foundation system is not site- or location-specific. You acknowledge our recommendation that you have a local designer or licensed engineer review the Plans and provide a site-specific foundation design if found necessary.
5. The Plans provide ideas and concepts and are not intended to be complete in all respects and details. Variations in standard sizes (e.g., of windows and doors), and brands, thicknesses, types and uses of different materials can change details. Varying local codes, ordinances, regulations, foundation requirements, and the layout of electrical, mechanical, and plumbing systems may also require changes of details.
6. Our Designs are reliable. However, you should normally anticipate that some changes and adjustments in the project will be required to correct possible errors and omissions in the Plans. Such changes are not indicative of, and should not be construed as, negligence on the part of the Designer.
7. Names of materials and manufacturers shown on the Plans do not represent an endorsement or recommendation by American Construction Consulting or Designer. Final selections of materials are the responsibility of you and/or your builder, including proper installation of materials, nailing, gluing, caulking, insulating, flashing, roofing, weatherproofing and many other small items and details not necessarily indicated on the Plans; and American Construction Consulting and Designer have no control or responsibility with respect to such matters.
8. The Plans do not have an architectural or engineering signature, seal and/or stamp. You agree to consult the local building official who can tell you if a review of the Plans by a licensed designer or engineer is required prior to submission of the Plans for a building permit. Because of the great differences in geography and climate in different areas, each state, county, and municipality has its own building codes, zoning requirements, ordinances, and/or building regulations. The Plans may need to be modified to comply with local requirements. In addition, you may need to obtain permits or inspections from local governments before and in the course of construction. Your right to use the Plans is conditioned on your agreement to, and you affirm that you shall: (i) consult a locally licensed designer or engineer of your choice prior to beginning construction, and (ii) strictly comply with all local building codes, zoning requirements, and other applicable laws, regulations, ordinances, and requirements.
9. Plans purchased for homes to be built in certain jurisdictions, such as the State of Nevada, must be redrawn by a locally registered professional; and you agree that, if applicable, you will consult a local building official or legal counsel with respect to such requirements.
10. 
    
11. LIMITATIONS OF LIABILITY.
12. 
    
13. IN NO EVENT SHALL AMERICAN CONSTRUCTION CONSULTING OR ITS AFFILIATES OR ANY DESIGNERS BE LIABLE FOR ANY INDIRECT, PUNITIVE, INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR IN ANY WAY CONNECTED WITH YOUR USE OF, DELAY IN USING, OR INABILITY TO USE THE SITE, INCLUDING ANY PLANS. AMERICAN CONSTRUCTION CONSULTING’ AND ITS DESIGNERS’ LIABILITY FOR ANY DIRECT DAMAGES SHALL BE LIMITED TO (A) THE AMOUNT, IF ANY, YOU HAVE PAID TO AMERICAN CONSTRUCTION CONSULTING IN CONNECTION WITH THE MATTER GIVING RISE TO SUCH LIABILITY, OR (B) IF YOU HAVE NOT MADE ANY PAYMENT, THE AMOUNT OF $100. SOME STATES OR JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES AND THUS CERTAIN LIMITATIONS ABOVE MAY NOT APPLY TO YOU. IF THIS LIMITATION OF LIABILITY OR THE EXCLUSION OF WARRANTY SET FORTH ABOVE IS HELD INAPPLICABLE OR UNENFORCEABLE FOR ANY REASON, AMERICAN CONSTRUCTION CONSULTINGS’ MAXIMUM LIABILITY FOR ANY TYPE OF DAMAGES SHALL BE LIMITED TO $100.